Hat Track for Govee Permanent Outdoor Lights 2 Pro

Track built for the Govee Permanent Outdoor Lights 2 Pro. Designed, formed, and shipped from Heber City, Utah.

The 2 Pro is a different light. The head is bigger, the base is angled, and it throws two independent color zones down your wall. Track made for the original Pro doesn't fit it. This does: a wider channel, a slot cut to seat the 2 Pro head, and spacing that matches the 2 Pro string.

There are two ways to end up with permanent lights on your roofline. You can hire a professional installer, who mounts the fixtures in aluminum track — straight lines, no visible wire, a finished edge at every corner and termination. Or you can mount a retail kit with adhesive pads and exposed wire, which looks acceptable for a season and then doesn't. This is the first option, sold to you directly. We've been making track for professional lighting installers since 2022.

Overlapping joints, not butt joints. Ours overlap by half an inch — each piece tucks under the next, so a hundred-foot run reads as one continuous line instead of a row of separate pieces.

Not a warehouse on the coast. Cut and formed in our own shop in Heber City, Utah. Not imported, not waiting on a container — which is why we're not out of stock.

No caps. No add-ons. No backorders. At .027" the aluminum is thin enough to cut and fold cleanly on site and heavy enough to hold the fold. Four cuts cover every condition on a normal roofline — a single 45, a miter, a Z for bump-outs, and a peak for gable apexes. Every cut is made with tin snips.

Matched, not approximated. Ours runs .027" pre-painted architectural aluminum — the same material, in the same finishes, as the gutters and fascia already on your house. If your HOA requires the track to match your trim, order a $10 sample and hold it up before you submit for approval.

• Material: .027" pre-painted architectural aluminum, made in the USA
• Profile: Hat, wide channel for the 2 Pro head — mounts to the face of the fascia
• Joint: 0.5" overlap, no visible seam between pieces
• Track length: 57.5" (2 lights per track)
• Light spacing: 28.5" on center, continuous across joints
• Fits Govee Permanent Outdoor Lights 2 Pro — models H3A51 (100 ft) and H3A53 (200 ft)
• Does not fit the original Govee Pro (H706) — see Pro track here
• 25 finishes + custom RAL
• Cuts with tin snips — no power tools required
• No endcaps or corner caps required

What's in each kit

• 100 ft — 21 tracks, covers ~99.75 ft (matches the 100 ft Govee 2 Pro kit)
• 200 ft — 42 tracks, covers ~199.5 ft (matches the 200 ft Govee 2 Pro kit)

Measure your roofline, then add 10%. Corners, cuts, and the occasional mismeasure add up. Come up short? Call or email us and we can help you purchase additional pieces. Individual pieces do require an original kit purchase.

Orders ship within 5–7 business days — in a rush, email us and we'll work with you. Every run is cut and finished to your color and length. Full refund available any time before your order ships.

We sell track only — you'll need your Govee 2 Pro system separately. See the full guide, finish chart, and sizing calculator →

Questions? Call 435-315-2509 or email info@peakslighting.com.